EV Charger Installation

While you may not think that you’d need to worry about ev charger installers near me, you should consider a few things. The first thing you should consider is where to put your EV charger. It is best to install it close to an electrical panel or in a parking lot. If you can’t do that, you can always try to convert a parking spot to an EV charging station. Depending on your local laws, you may have to deal with the permitting process. A reputable electrician will work with you to determine the ideal location.

How to Know About EV Charger Installation

Another important consideration is the location of your outlet. While it is convenient to place an outlet near the electrical panel, it’s best to put it as close to the EV port as possible. The distance from the outlet to the EV port can vary, so you need to know where it’ll be most convenient. Most home EV chargers have cords of around 15 feet, so you’ll need to make sure you have an available space. If you are unsure of how to install the charger, you can always ask a local electrician. You’ll find the lowest price through Qmerit.

Once the EV charging station is installed, you’ll need to run 240 volts from the breaker panel to the EV port. You’ll need a double-pole circuit breaker, which will double the circuit voltage to 240 volts. The double-pole breaker will require two 120 volt buses at once. The double-pole circuit breaker should be installed at the charging location using a 4-strand cable. The ground wire goes to the ground bus bar, and the common wire to the wire bus bar. You may be able to install it in an existing panel, and a panel can be moved to another location.


Leave a Reply

Your email address will not be published. Required fields are marked *